Plug-In Electromagnetic Flowmeter LDG High-Precision Intelligent Large-Diameter Large-Flow Pipeline Without Broken Pipe Flowmeter

November 25, 2024

We can supply Plug-In Electromagnetic Flowmeter LDG High-Precision Intelligent Large-Diameter Large-Flow Pipeline Without Broken Pipe Flowmeter

Technical Parameter

Measurement caliber	DN6-DN2600
Nominal pressure	DN10~DN50, default pressure resistance 4mPa DN65~DN150, default pressure resistance 1.6mPa DN200-DN600, default pressure resistance 1.0mPa DN700~DN2600, default additional pressure 0.6mPa All calibers can be customized for high-pressure types at an additional cost
Body material	Carbon steel with paint (standard configuration) Optional 304 or 316 materials
Connection method	Flange integrated connection (standard configuration) DN15~50 can be customized with clamp or threaded connection
Power supply method	Standard AC220V/DC24V dual power supply One route can be optionally equipped with battery power supply (DC24V)
Measurement accuracy	Integrated type default 0.5%, insertion type 2.5%
Protection Level	IP65 (Standard) Modular customizable IP68 submersible type
Signal Output	4-20mA (Standard) Pulse RS485 MOD-BUS
Lining Material	Default PTFE for DN65 and below Default rubber for DN80 and above The lining material should be selected based on the actual measured medium
Electrode Material	Default 316 stainless steel Electrode material should be selected based on the characteristics of the medium; custom options include Hastelloy, titanium, tantalum, platinum, etc.
Conductivity Requirements	Liquid conductivity must be greater than 20u/cm